Español
Русский
6 inch COP64 DHD360 SD6 QL60 MISSION6 152mm 165mm 175mm 190mm 203mm Dth Hammer Bit
| 3inch dth bit | 4inch dth bit | 5inch dth bit | 6inch dth bit | 8inch dth bit |
| start order | start order | start order | start order | start order |
We have all series of drilling equipment and drilling tools for water well or mining
By using high-quality raw materials, utilizing advanced craft technologies and imposing strict quality inspection, the product range covers:DTH drilling rig,DTH drill tools(dth hammers and dth bits),drill pipes, underground water detector, shank adapters and coupling sleeves, drilling rig, air compressor and spare parts for drill equipment.
All products are interchangeable with various products manufactured by Atlas Copco.
The life of the DTH bit depends on the material and technology of the bit. The ANBIT bit is made of the most efficient high quality alloy steel.
Use quality forged steel, heat treatment and shot peening to provide a durable and reliable balance of strength and toughness.
1. Long life of bit: alloy steel material has a long service life, which is higher than similar products;
2. High drilling efficiency: the drill teeth are wear-resistant, so that the drill bit can always be sharp, thus greatly improving the entering speed of the teeth;
3. Steady drilling speed: the drill bit breaks the rock by scraping and cutting;
4. Good spacing effect: the new diamond head has strong abrasion resistance and good spacing performance, which enables the cutting teeth to be utilized efficiently;
5. Wide application range: it has been proved by practice that this drill bit is suitable for drilling in soft and medium hard formations, such as carbonate rock, limestone, cretaceous rock, clay rock, siltstone and sandstone (below grade 9 of drillability,). Compared with general drills, especially in rock formations of grade 6-8, the effect is especially remarkable.
The submersible drill bit made by ABT ranges from 2 inches to 40 inches in diameter and has a variety of the most common end face shapes, alloy tooth styles and shank styles to match the application and rock formations you are drilling in.
We can customize the drill bit according to your requirement. Different drill head shapes are selected according to different rock formations.
| Drill Bit | The drill head diameter(mm) | NO.Air Holes | Gauge BUttons | Front Buttons |
| ND65(DHD360/COP64) | 152 | 2 | 8*φ18 | 7*φ16 |
| 165 | 2 | 8*φ18 | 8*φ16 | |
| 175 | 2 | 8*φ18 | 10*φ16 | |
| 190 | 2 | 10*φ18 | 12*φ16 | |
| 203 | 2 | 10*φ18 | 13*φ16 | |
| SD6 | 152 | 2 | 8*φ16 | 7*φ16 |
| 165 | 2 | 8*φ18 | 8*φ16 | |
| 175 | 2 | 8*φ18 | 8*φ16 | |
| 190 | 2 | 10*φ18 | 12*φ16 | |
| 203 | 2 | 10*φ18 | 14*φ16 | |
| QL60 | 152 | 2 | 8*φ18 | 7*φ16 |
| 165 | 2 | 8*φ18 | 8*φ16 | |
| 175 | 2 | 8*φ18 | 8*φ16 | |
| 190 | 2 | 10*φ18 | 12*φ16 | |
| 203 | 3 | 10*φ18 | 13*φ16 | |
| Mission6 | 152 | 2 | 8*φ18 | 8*φ16 |
| 165 | 2 | 8*φ18 | 10*φ16 | |
| 175 | 2 | 8*φ18 | 10*φ16 | |
| 190 | 2 | 10*φ18 | 12*φ16 | |
| 203 | 2 | 10*φ18 | 14*φ16 |
We can design and manufacture according to customers requirement of the bit diameter,the NO.of air holes,carbide buttons and the face shape.
ABT Drilling Equipment Co., Ltd. mainly provides holistic drilling solutions, serving the mining, stone crushing, water conservancy drilling industry, to help you solve the problem of drilling at high efficiency and low cost. We mainly provide mobile air compressors, drilling rigs, impactors, drills, crushers, water meters, is your stable and reliable partner.
